Skip to main content

SPC Chart

SPC CHART REPORT​

note

This screen is specifically designed to provide detailed SPC Chart Reports with advanced search fields, enhancing users’ ability to find accurate results efficiently.

1.1 Search for SPC Chart Reports​

Step-by-Step Guide

Step 1: Access the SPC Chart Report Section​

  1. Navigate to the main menu and click on Production and Quality
  2. Go to Reports and select SPC Chart Report

Step 2: Understanding the Search Fields​

The SPC Chart Report screen allows users to apply multiple filters. Here's a breakdown of each field:

  • Report From Date: Specifies the start date for the SPC chart report range
  • Report To Date: Specifies the end date for the SPC chart report range
  • Machine (Single-select dropdown): Select one machine to filter SPC data
  • Part (Single-select dropdown): Select the part number required for the report
  • Control Plan (Single-select dropdown): Lists control plans associated with the selected part
  • Process (Single-select dropdown): Lists processes linked to the selected control plan
  • Print Number (Single-select dropdown): When Spec Value (Go/No-Go) is selected as a variable in the control item for the selected process, the corresponding values will be automatically fetched and displayed in this dropdown.

🧩 By using these filters effectively, users can tailor the SPC Chart Report to meet specific requirements.

Step 3: Understanding Field Validations​

Once inputs are provided, click Submit to generate the report.

  • Fields marked with a red asterisk (*) are mandatory
  • If no data exists for a control plan, the message will be:
    ⚠️ “Info! No Data for the control plan”
  • If data is successfully found, the message will be:
    ✅ “Success! Control Process Retrieved Successfully”

Step 4: Start Searching​

Once all required fields are filled in, click Submit to generate the SPC chart report.

  • Mandatory Fields:

    • Report From Date
    • Report To Date
    • Machine
    • Part
    • Control Plan
    • Process
    • Print Number

  • Filter Application: Clicking Submit fetches SPC chart reports using the selected filters, narrowing results efficiently.

  • Clear Functionality: Clicking Clear resets all applied filters to their default state, readying the form for a new search.

Step 5: Understanding the Report Header​

Once the report is generated, a header table appears above the charts, summarising the part and specification being charted:

  • Part No: The part number selected in the search.
  • Customer: The customer linked to the selected part.
  • Reference No: The document identification / revision number of the control plan item.
  • Instrument: The calibration method configured on the control plan item for the selected specification.
  • Part Name - Rev: The part's name along with its revision.
  • Specification: The Spec Value configured on the control plan item.
  • Least Count: The least count of the instrument used for measurement.
  • USL / LSL: The Upper Spec Limit and Lower Spec Limit configured on the control plan item.
  • UCL / LCL: The Upper Control Limit and Lower Control Limit configured on the control plan item.
  • Op & Description: The Print Number and Description from the control plan item, shown together.

Below the header, the SPC Chart / Run Chart Table and Moving Range Table list each reading against a Heat Serial Number column (one column per reading), with rows for the Reading, Moving Range (where applicable), Date, Time, and Operator who recorded it.

That’s It! You’ve successfully learned how to search for SPC Chart Reports using advanced filters in the DMeX application.

For further assistance, please contact the DMeX Support Team.